See all: Marine Products > Surface sealers and primers
See all: Bonda > Bonda Marine Products > Bonda Surface sealers and primers
Bonda - Seal Clear non-porous sealer
Product Reference: [ ]
Clear, Non-Yellowing, U.V light stable, non-porous-seal
Use on wood, masonry, concrete, cement and stone floors
Retain the appearance of finished surfaces, preventing oxidisation and tarnishing of metal
Resistant to oils, fuels and a range of aggressive chemical
For wood, metal, cork, concrete, lino
Type: A moisture cured single part polyurethane varnish.
Intended Use: To be applied for marine use. For wood, masonry, concrete, cement and stone floors.
Special Features: The coating is tough yet flexible and has excellent adhesion to many materials. Bonda seal is resistant to oils, fuels and a range of aggressive chemicals. Prevents the oxidising and
tarnishing of metal.
Preparation: Should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed.
Application: Apply by brush or roller.
Coats: 3 coats are optimal.
Drying Time: 60-90 minutes.
Re-coating Time: Each coat can be reapplied when the surface is finger tacky. DO NOT ALLOW 4 hours to elapse between coats.
Application Temperature: Can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Coverage: 500g/sq.m.
Maintenance: Not applicable.
Compatibility: Not applicable.
Settlement: Shake well before use.
Shelf-life/Storage: Many years if suitably stored unopened in original container.
**NOTE; this is a moisture-
hardened product so storage life of OPENED tins is limited.**
Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek
medical attention. After contact with skin, wash immediately with soap and water or a
suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray.
Do not inhale vapour. Full safety data available on request or from www.bondaglass.com
Clean-Up Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are NOT suitable.
https://www.rustins.ltd/images/files/2391-PDS-BondaSealClearPDS.pdf
https://www.rustins.ltd/images/files/2391-SDS-BONDASEAL%20CLEAR%20SDS.pdf
*** *** Corona Virus update: *** ***
We are still trying to fulfil orders as best as we can.
Many manufacturers and suppliers are closed.
Some manufacturers are on extended lead times.
If we are able to fulfil your order we will do so.
If it is not at all possible we will contact you.
If your order is urgent please contact us prior to ordering.
We are running with reduced staff and high workload.
Thank you for your understanding.
* * * * * * * * * * * * * * * * * * * * * * * * * *
This item is subject to VAT at the current rate
Click here to see a printable version of this page (PDF format)
Return to: previous page
Some customers who bought this product also bought:
TIMCO - Solo chipboard and Woodscrews - Countersunk ZYP
Our Price from:£0.60
