Exitex - Cresfinex - Regency Finials PVC 11"

Product Reference: [ 1.05.005 ]

Fit the Radius End Cap to the ridge section.
Ensure both sections - the crest retaining upper section and the lower ridge section finish flush and that you have attached the top crest retaining profile onto its base ridge section.
Slide into the top crest retaining section your selection of crests - for PVC you might have to trim one down in size allowing enough space (65mm) for the base of the finial to be pushed home into the crest retaining profile.
Check that the top of the finial base aligns with the crest you are using you might have to remove some material from the top of the finial base connecting flange in order to have a uniform alignment between finial base and crests.
Drill a 2.5mm hole into the top flange of the crest retaining profile and into the base of the finial flange - screw in the stainless steel retaining screw-your finial assembly is now firmly retained.

Please note:
We are a Real Shop, with Real People.
If your order is urgent and / or for significant quantities / bulk supply, we would always recommend that you contact us prior to ordering to confirm your requirements and lead times.

This item is subject to VAT at the current rate

Regency Finials PVC 11"