See all: Wood Finishes > EXTERIOR OILS

See all: Treatex Ltd > Treatex Ltd Wood Finishes > Treatex Ltd EXTERIOR OILS

Treatex Ltd - EXTERIOR Oak REGENCY OAK 1L 2.5L-

Product Reference: [ 31510E 31510H ]

Treatex External Oak has been developed as a base coat to treat timbers like Oak and Idigbo. Suitable for use externally and internally, it provides a high class finish that leaves the wood looking natural. Areas of application include doors, windows and fascia boards as well as all other external woodwork.

Treatex External Oak is based on the same natural sustainable oils used in Hardwax Oil range including a modified alkyd resin, linseed oil and waxes, with an addition of siccatives for faster drying times. It is free from lead and cobalt and contains no biocides or preservatives. It comes in two colours: Virgin Oak and Regency Oak.

Features
•Part of a 2 product system
•UV and water resistant once finished with Treatex External Oak Protection
•Suitable for indoor and outdoor use
•Contains no biocides or preservatives
•Contains UV inhibitors

Coverage

1 litre covers approximately 20m2 one coat depending on timber and method of application.
2.5 litres covers approximately 50m2 one coat depending on timber and method of application.

Preparation

Prior to application all previous finishes must be removed as Treatex products work by absorption. Surfaces should be sanded with 100-120 grit sandpaper and all external sharp edges should be rounded to approximately 3mm (5mm on cill front). The timber must have a moisture content below 18% and the ambient temperature must be greater than 8oc. The tin should be kept at room temperature prior to use. When using Treatex External Oak, we advise that sufficient product is purchased to complete the whole project and where more than one tin is required it is advisable to mix them together before use. We strongly recommend a trial application prior to starting a project.

Application of Treatex External Oak

Stir the tins thoroughly and using a good quality brush (Treatex brushes are available), work along the end grain, applying 1 even coat of Treatex External Oak to all surfaces. Pay particular attention to the end grain by a applying a 2nd application whilst the finish is still wet on these areas. Allow to dry for at least 12 hours before applying two coats of Treatex External Oak Protection.

Tips

Wet brushes and rollers can be cleaned with Treatex Thinner or white spirit. Store tins in a cool and frost free environment. Unopened tins will last for five years. Once tins are opened, transfer contents to smaller airtight container.

PLEASE NOTE: For external oak this is a 2 part system and should be used in conjunction with Treatex external oak protection

*** *** Corona Virus update: *** ***

We are still trying to fulfil orders as best as we can.
Many manufacturers and suppliers are closed.
Some manufacturers are on extended lead times.
If we are able to fulfil your order we will do so.
If it is not at all possible we will contact you.
If your order is urgent please contact us prior to ordering.
We are running with reduced staff and high workload.
Thank you for your understanding.

* * * * * * * * * * * * * * * * * * * * * * * * * *

This item is subject to VAT at the current rate

EXTERIOR Oak REGENCY OAK 1L  2.5L-

Exterior Oak Regency Oak 1l =

(Prod ref 6700-11104) Our Price: £20.60 (£24.72 inc. VAT)

EXTERIOR Oak REGENCY OAK 2.5L =

(Prod ref 6700-11105) Our Price: £49.68 (£59.62 inc. VAT)

Click here to see a printable version of this page (PDF format)

Return to: previous page

Some customers who bought this product also bought:

Photo of Solo chipboard and Woodscrews - Countersunk ZYP
TIMCO - Solo chipboard and Woodscrews - Countersunk ZYP

Our Price from:£0.60